You are here: Home > Products > Industrial Device Server > IDS-5011
IDS-5011

Industrial 1-port RS232 to 1-port 10/100TX Device Server

  
 
 Overview
     IDS-5011 is an innovative 1 port RS232 to 1 port LAN device server. To assure the agility and security of critical data, IDS-5011 offers many powerful features for HW & SW redundant functions. IDS-5011 can simultaneously transfer data into 5 host PCs. This feature can assure all critical data that saved in different host PCs to avoid Ethernet break or host PCs failure. Secondly, IDS-5011 provides dual redundant power inputs on DC power jack and terminal block. IDS-5011 also provides NAT pass through function so that users are able to manage IDS-5011 inside or outside the NAT router. It is easy for different IP domain users to use IDS-5011. Therefore, IDS-5011 is one of the best communication redundant solutions for application of serial devices.

 Features
Redundant 5 multiple host devices supported to protect your industrial network
Versatile modes & event alarm by e-mail
HTTPs & SSH protocol supported for secured management
NAT router pass through
IP table to prevent access from unauthorized IP address
Confi gurable by Web-based and Windows utility (DS-Tool)
Dual redundant DC power inputs of terminal block and power jack
Rigid IP-30 housing design
DIN-Rail and panel mounting enabled

 Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 1

 

 Serial Ports
Connector DB9 x 1
Operation Mode RS232
Serial Baud Rate 110 bps to 460.8 Kbps
Data Bits 5, 6, 7, 8
Parity odd, even, none, mark, space
Stop Bits 1, 1.5, 2
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Flow Control XON/XOFF, RTS/CTS, DTR/DSR

 

 LED Indicators
Power Indicator PWR 1(2) / Ready :
  Red On : Power is on and booting up.
  Red Blinking : Indicates an IP confl ict, or DHCP or BOOTP   server did not respond properly.
  Green On : Power is on and functioning Normally.
  Green Blinking : Located by Administrator.
10/100TX RJ45 Port Indicator Green for port Link/Act at 100Mbps. Amber for port Link/Act at 10Mbps.
Serial TX / RX LEDs Red : Serial port is receiving data
Green : Serial port is transmitting data

 

 Power
Input Power Dual DC inputs. 12-48VDC on 3-pin terminal block and power jack
Power Consumption (Typ.) 4 Watts
Overload Current Protection Present

 

 Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 72(W)x29.4(D)x123.4(H) mm (2.83x1.16x4.86 inch.)
Weight (g) 327 g

 

 Environmental
Storage Temperature -40 to 85C (-40 to 185F)
Operating Temperature -10 to 60C (14 to 140F)
Operating Humidity 5% to 95% Non-condensing
Reverse polarity protection Present on terminal block

 

 Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years


 Available Model
IDS-5011   Industrial 1-port RS232 to 1-port 10/100TX Device Server

 DIN-Rail Power Supply
DR-4512   45W DIN-Rail 12VDC/3.5A Power Supply with universal 100 to 240VAC input
DR-4524   45W DIN-Rail 24VDC/2A Power Supply with universal 100 to 240VAC input
DR-75-12   75W DIN-Rail 12VDC/6.3A Power Supply with universal 100 to 240VAC input
DR-75-24   75W DIN-Rail 24VDC/3.2A Power Supply with universal 100 to 240VAC input
DR-75-48   75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input
DR-120-12   120W DIN-Rail 12VDC/10A Power Supply with 100 to 12VAC / 220 to 240VAC input by switch
DR-120-24   120W DIN-Rail 24VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input by switch
DR-120-48   120W DIN-Rail 48VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input by switch

Go Top