You are here: Home > Products > Industrial Ethernet Switch > IES-3062GT
IES-3062GT

Industrial 8-port Managed Ethernet Switch

  
 
 Overview
     IES-3062 series is managed Redundant Ring Ethernet switch with 6x10/100Base-T(X) & 2x100Base-FX, 1000Base-T, 1000Base-SX or 1000Base-LX ports. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-RSTP and MSTP/RSTP/STP(IEEE 802.1s/w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. Another Open-Ring technology also supports other vendor's proprietary ring. IES-3062 series can be managed centralized and convenient by a powerful windows utility Open-Vision. In addition, the wide operating temperature range from -40C to 70C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for highly-managed and Fiber Ethernet application.

 Features
Worlds fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection)
Open-Ring supports in open architecture (recovery time is depended on the other vendors ring technology)
O-RSTP supports applications of complex topology with optimized RSTP technology
MSTP/RSTP/STP(IEEE 802.1s/w/D)
IGMP snooping for fi ltering multicast traffic
Port Trunking for easy bandwidth management
SNMP v1/v2c/v3 support for secured network management
RMON for traffi c monitoring
Event notifi cation through Syslog, Email, SNMP trap, and Relay Output
Port lock to prevent access from unauthorized MAC address
Windows utility (Open-Vision) supports centralized management and confi guration by Web-based ,Telnet, Console, CLI
Triple redundant DC power inputs of terminal block and power jack
Complete combination of 10/100Base-T(X), 100Base- FX, 1000Base-T, 1000Base-SX, and 1000Base-LX ports
Very wide operating temperature range from -40 to 70C
Rigid IP-30 housing design
DIN-Rail and panel mounting enabled

 Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX 6
1000Base-T Ports in RJ45 Auto MDI/MDIX 2

 

 Technology
Ethernet Standards IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-T(X) and 100Base-FX
IEEE 802.3z for 1000Base-X
IEEE 802.3ab for 1000Base-T
IEEE 802.3x for Flow control
IEEE 802.3ad for LACP (Link Aggregation Control Protocol)
IEEE 802.1D for STP (Spanning Tree Protocol)
IEEE 802.1p for COS (Class of Service)
IEEE 802.1Q for VLAN Tagging
IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol)
IEEE 802.1X for Authentication
IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table 8192 MAC addresses
Priority Queues 4
Processing Store-and-Forward
Switch Properties Switching latency: 7 us
Switching bandwidth: 5.6Gbps
Max. Number of Available VLANs:4096
IGMP multicast groups: 1024
Port rate limiting: User Defi ne
Security Feature Enable/disable ports, MAC based port security
Port based network access control (802.1x)
VLAN (802.1q ) to segregate and secure network traffi c
Radius centralized password management
SNMPv3 encrypted authentication and access security
Software Features STP/RSTP/MSTP (IEEE 802.1D/w/s)
Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units
TOS/Diffserv supported
Quality of Service (802.1p) for real-time traffi c
VLAN (802.1Q) with VLAN tagging and GVRP supported
IGMP Snooping for multicast fi ltering
Port confi guration, status, statistics, monitoring, security
Network Redundancy O-Ring
Open-Ring
O-RSTP
STP
RSTP
MSTP
RS-232 Serial Console Port RS-232 in RJ45 connector with console cable. Baud rate setting : 9600bps, 8, N, 1

 

 LED Indicators
Power Indicator Green : Power LED x 3
R.M. Indicator Green : Flashing to indicate system operated in O-Ring Master mode
O-Ring Indicator Green : Indicate system operated in O-Ring mode
Fault Indicator Amber : Indicate unexpected events occurred
10/100TX RJ45 Port Indicator Green for port Link/Act. Amber for Duplex/Collision
1000 Base-T / Fiber Port Indicator Green for port Link/Act. Amber for Link

 

 Fault contact
Relay Relay output to carry capacity of 1A at 24VDC

 

 Power
Redundant Input Power Triple DC inputs. 12-48VDC on 7-pin terminal block, 12-45VDC on power jack
Power Consumption (Typ.) 5 Watts
Overload Current Protection Present
Reverse Polarity Protection Present on terminal block

 

 Physical Characteristic
Enclosure IP-30
Dimension (W x D x H) 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g) 710 g

 

 Environmental
Storage Temperature -40 to 85C (-40 to 185F)
Operating Temperature -40 to 70C (-40 to 158F)
Operating Humidity 5% to 95% Non-condensing

 

 Regulatory approvals
EMI FCC Part 15, CISPR (EN55022) class A
EMS EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),
EN61000-4-8, EN61000-4-11
Shock IEC60068-2-27
Free Fall IEC60068-2-32
Vibration IEC60068-2-6
Safety EN60950
Warranty 5 years

 Available Model
IES-3062GT   Industrial 8-port Managed Ethernet Switch with 6x10/100TX & 2x1000Base-T


 DIN-Rail Power Supply
DR-4512   45W DIN-Rail 12VDC/3.5A Power Supply with universal 100 to 240VAC input
DR-4524   45W DIN-Rail 24VDC/2A Power Supply with universal 100 to 240VAC input
DR-75-12   75W DIN-Rail 12VDC/6.3A Power Supply with universal 100 to 240VAC input
DR-75-24   75W DIN-Rail 24VDC/3.2A Power Supply with universal 100 to 240VAC input
DR-75-48   75W DIN-Rail 48VDC/1.6A Power Supply with universal 100 to 240VAC input
DR-120-12   120W DIN-Rail 12VDC/10A Power Supply with 100 to 12VAC / 220 to 240VAC input by switch
DR-120-24   120W DIN-Rail 24VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input by switch
DR-120-48   120W DIN-Rail 48VDC/5A Power Supply with 100 to 120VAC / 220 to 240VAC input by switch