You are here: Home > Products > Industrial Device Server > NPort-5610&NPort-5630
NPort-5610&NPort-5630

8 and 16-port RS-232/422/485 serial device servers

  
 

Features and Benefits


  • 8 or 16 serial ports supporting RS-232/422/485
  • Standard 19-inch rackmount size
  • 10/100M auto-sensing Ethernet
  • Built-in 15 KV ESD protection for all serial signals
  • Easy IP address configuration with LCD panel
  • Choice of configuration methods: Web console, Telnet console, and Windows utility
  • Versatile socket operation modes, including TCP Server, TCP Client, UDP, and Real COM
  • SNMP MIB-II for network management

Overview

Network Readiness for up to Sixteen Serial Devices

NPort® 5610/5630 rackmount device servers can conveniently and transparently connect up to sixteen serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. Data transmission between the serial and Ethernet interfaces is bi-directional. By using NPort® device servers, you not only protect your current hardware investment, but also allow for future network expansion. You can both centralize the management of your serial devices, and distribute management hosts over the network.

• LAN Interface
Number of Ports 1
Speed 10/100 Mbps
Connector(s) 8-pin RJ45
Magnetic Isolation Protection 1.5 KV built-in


• Optical Fiber Interface
Distance Multi mode: 0 to 2 km, 1310 nm (62.5/125 µm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 µm, 3.5 PS/(nm*km))
Min. TX Output -20 dBm (Multi mode), -5 dBm (Single mode)
Max. TX Output -14 dBm (Multi mode), 0 dBm (Single mode)
Sensitivity -34 to -30 dBm (Multi mode), -36 to -32 dBm (Single mode)


• Serial Interface
Serial Standards NPort® 5610: RS-232
NPort® 5630: RS-422/485
Number of Ports 8 or 16
Connectors RJ45 (8 pins)
Serial Line Protection 15 KV ESD protection for all signals
RS-485 Data Direction Control ADDC® (automatic data direction control)


• Serial Communication Parameters
Data Bits 5, 6, 7, 8
Stop Bits 1, 1.5, 2
Parity None, Even, Odd, Space, Mark
Flow Control DSR/DTR and RTS/CTS (RS-232 only), XON/XOFF
Baudrate 50 bps to 921.6 Kbps


• Serial Signals
RS-232 TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
RS-422 Tx+, Tx-, Rx+, Rx-, GND
RS-485-4w Tx+, Tx-, Rx+, Rx-, GND
RS-485-2w Data+, Data-, GND


• Software
Network Protocols ICMP, IP, TCP, UDP, DHCP, BOOTP, Telnet, DNS, SNMP, HTTP, SMTP, SNTP, ARP, PPP, SLIP, RTelnet, RFC2217
Driver Support Windows Real COM driver (for Windows 95, 98, ME, NT, 2000, XP, 2003, Vista, XP x64, 2003 x64, Vista x64), Linux Real TTY driver, Fixed TTY driver (for SCO Unix, SCO OpenServer, UnixWare 7, UnixWare 2.1, SVR 4.2, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i)
Configuration Options Web Console, Telnet Console, Windows Utility


• Mini Screen with Push Buttons
LCD Panel Liquid Crystal Display on the case
Push Buttons Four push buttons for convenient on-site configuration


• Physical Characteristics
Enclosure SECC sheet metal (1 mm), providing IP30 protection
Weight NPort® 5610-8: 3340 g
NPort® 5610-8-48V: 3160 g
NPort® 5630-8: 3380 g
NPort® 5610-16: 3420 g
NPort® 5610-16-48V: 3260 g
NPort® 5630-16: 3400 g
Dimensions Without ears: 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
With ears: 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)


• Environmental Limits
Operating Temperature 0 to 55C (32 to 131F)
Operating Humidity 5 to 95% RH
Storage Temperature -20 to 75C (-4 to 167F)


• Power Requirements
Input Voltage NPort® 5610/5630: 100 to 240 VAC, 47 to 63 hz
NPort® 5610-48V: 48 VDC (20 to 72 VDC, -20 to -72 VDC)
Power Consumption NPort® 5610-8/16: 141 mA @ 100 VAC, 93 mA @ 240 VAC
NPort® 5630-8/16: 152 mA @ 100 VAC, 98 mA @ 240 VAC
NPort® 5610-8/16-48V: 135 mA @ 48 VDC
Power Line Protection 4 KV burst (EN61000-4-4: EFT/B), 2 KV surge (EN61000-4-5)


• Regulatory Approvals
Safety UL (UL60950-1), TÜV (EN60950-1)
EMC CE (EN55022 Class A, EN55024), FCC Part 15 Subpart B Class A
NPort® 5610 only: IEC61000-4-12
Medical EN60601-1-2 Class B, EN55011


• Reliability
Alert Tools Built-in buzzer and RTC (real-time clock)
Automatic Reboot Trigger Built-in WDT (watchdog timer)
MTBF (meantime between failures) NPort® 5610-8: 97294 hrs
NPort® 5610-16: 94928 hrs
NPort® 5610-8-48V: 96758
NPort® 5610-16-48V: 94417 hrs
NPort® 5630-8: 118405 hrs
NPort® 5630-16: 91483 hrs


• Warranty
Warranty Period 5 years
External Device Servers
  Model No. Description

NPort 5610-16

16-Port RS-232 Serial Device Server, 141 mA @ 100 VAC, 93 mA @ 240 VAC

NPort 5610-16-48V V2

16-port RS-232 Serial Device Server, 135 mA @ 48 VDC

NPort 5610-8

8-Port RS-232 Serial Device Server, 141 mA @ 100 VAC, 93 mA @ 240 VAC

NPort 5610-8-48V V2

8-port RS-232 Serial Device Server, 135 mA @ 48 VDC

NPort 5630-16

16-Port RS-422/485 Serial Device Server, 152 mA @ 100 VAC, 98 mA @ 240 VAC

NPort 5630-8

8-Port RS-422/485 Serial Device Server, 152 mA @ 100 VAC, 98 mA @ 240 VAC

Connection Cables
  Model No. Description

CBL-RJ45M9-150

RJ45 (8-pin) to DB9(M) Cable

CBL-RJ45F9-150

RJ45 (8-pin) to DB9(F) Cable

CBL-RJ45M25-150

RJ45 (8-pin) to DB25(M) Cable

CBL-RJ45F25-150

8-pin RJ45 to DB25 female, 150 cm Connection Cable