You are here: Home > Products > Open-Vision Pro > Open-Vision
Open-Vision

Powerful Network Management Windows Utility Suit

  
 
 Overview
    Due to management utility is more important for administrators to monitor and manage all devices in a local network. ORing is proud to announce Open-Vision 2.0, which is a powerful network management utility suit including four different programs, could meet various demands from network monitor and managements in a wide range of industrial applications. Except the four basic functions - Centralized configuration / Visualized management / Complete monitor / Early warning, Open-Vision 2.0 provides four intelligent advantages which surpass the prior one in different aspects, below well have detail descriptions about these strong points. Only through these advanced monitoring features and various warning systems, the users could be informed any accidental situations in the local network and recover the network immediately. Hence, the stability and reliability of the local network could be assured.

Centralized configuration :
     Open-Vision 2.0 could help the administrator to configure all ORings Ethernet switches at once within a few steps by powerful wizards, IP Setting wizard, firmware update wizard, and O-Ring, redundant ring, setting wizard, in ORing commander.  The administrators do not have to configure the managed switches one by one anymore.

 
Visualized Management :

     ORings Topology View could show up the complex topologies of all of ORings Ethernet switches in the local network. Further, different switches could be grouped by different IPs and to be shown in different topology windows. Thus, administrators need not to monitor all of the switches in the local network at once, which makes the job of monitoring easier and more efficient. On the other hand, the health status of the connections will be shown on by different colors. ORing topology view helps the administrators to do the management visualizedly, intuitively, and more efficiently.

 
Complete Monitor :
     ORing-Vision 2.0 has various mechanisms to monitor the statuses of ORings switches, including event log, and SNMP traps. The administrators will be informed the occurrences of any abnormal events by email, and the list of event log could be exported as an excel file. Moreover, the configurations of all ORings switches could be saved and the status of configurations of all switches in local network could be scanned regularly to detect any changes of the configurations. Hence, administrators could know any unexpected changes of the configurations of switches. On the other hand, ORing Host monitor could automatically ping and check the health statuses of connections among all IP-based devices in local area network. Host Monitor also features IP categorized function, and all of IP-based devices could be grouped by the different IPs and to be monitored.
 
Early Warning :
     Based on the various monitor mechanisms, if any failure is occurred in the network, administrators could be informed at a very early stage.
 
 

 

 Features
Device configuration scan
IP setting group wizard, firmware upgrade group wizard, and redundant ring (O-Ring) setting wizard
Status Monitoring and Alarm
Network analysis function
Draw the whole network topology automatically and path management available
Devices could be grouped and managed by different IP ranges in ORing Topology View
The health status of connections are automatically cheked in ORing topology view
Support MIB Browser and compiler
IP scan to detect all of the IP-based devices in the local network
No limitation on the amount of devices could be monitored.


 Software Specifications

 

ORing Commander

  • Automatic devices discovery
  • Device status monitoring
  • Syslog events
  • Scan device configuration
  • IP setting Group Wizard, Firmware Upgrade Group Wizard, and Redundant Ring (O-Ring) Group Wizard

ORing Topology View

  • The topology views to show the topology of connections among all of the switches in the local network.
  • IP categorized function
  • Configure the switches into different IP domains, and there is no limitation of the nodes to be configured by ORing topology view.
  • Visualized warning system of the health statuses of the connections among the switches
  • Traffic flow analysis of each node
  • Event log and it could be exported as an excel file.
  • The administrator could plan the future topology manually in Edit operation mode.

ORing MIB Browser

  • Support MIB Browser and compiler
  • Support SNMP v1/v2c
  • Vendor Independent - Manages any SNMP device from any vendor

ORing Host Monitor

  • IP scan to detect all of the IP-based devices in the local network.
  • To check the health statuses of connections of all IP-based devices
  • All of IP-based devices could be grouped and managed by different IP ranges.

 System Requirement
Software Requirements
Operating System Windows XP/2K3/2000
Browser IE 6.0 Service Pack 1 or higher version
Hardware Requirement

CPU

Intel Core 2 Duo 2.4 GHz or above

RAM

1G or above

Hard Disk Space

1G or above



 Available Model
Open-Vision v.2.0   Powerful Network Management Windows Utility Suit