You are here: Home > Products > Redundant Power Supply > ACE-C232
ACE-C232
230W AC-DC AT PS/2 Redundant Power Supply

 
Specifications Specifications
 
Input nput : 90 VAC - 130 VAC or 180 VAC - 260 VAC
Output (Max. output power 230 W at 30ºC)

Voltage

Min.load

Rated Load

Max. Load

Voltage Accessory

+5V

4.0 A

20 A

25 A

4.80 V to 5.20 V

+12V

1.0 A

10 A

12 A

11.4 V to 12.9 V

-12V

0.1 A

0.5 A

1 A

-11.30 V to -12.60 V

-5 V

0.1 A

0.5 A

1 A

-4.65 V to -5.25 V

Ripple and Noise The peak to peak ripple and noise for the +5 V output is less than 50 mV,for the +/-12 V and -5 V output it's less than 100 mV.
Line Regulation The line regulation for each output is less +/- 1% while measuring at rated load and +/-10% or 115VAC or 230VAC input voltage changing.
Load Regulation The output voltage load regulation is less than the following values when changing each output and 40% to 60% rated load, with all other outputs at 60% of the rated load.
+5V:+/-4% +12V:+/-5% -12V:+/-5% -5V:+/-2%
Watt 230W
Hold-up Time >16ms
Efficiency 70% typical
Protection Output protection: Overvoltage and short protection
MTBF 122,347 Hrs
Safety CSA22.2 No. 234;
EMI ECC docket 20780 curve"B" ; EN55022 class "B"
Power good signal Go high 100ms to 500ms after all output DC Voltages are within regulation limits.
Power connectors DIN 41612 C96
Storage Temperature -40 ºC~ 75ºC
Operation Temperature 0 ºC~ 50ºC(derating about 20% form 30ºC to 50ºC)
Dimensions 140 x 150 x 86mm
Pin Pin Assignment:

Pin 1

AC L

Pin 11, 12, 13

+12V

4

AC N

11~25

GND

9

-5 V

26~31

+5V

10

-12V

32

Power good

Cooling Cooling with a 42CFM fan
 
Ordering Information Ordering Information
 
Part No. Description
ACE-C232-RS PS/2 size 230W redundant power supply includes two ACE-R23A
ACE-R23A-RS 230W redundant power module, For ACE-C232-RS