You are here: Home > Products > VESA Mount DC UPS Module > AUPS-A20
AUPS-A20
VESA 75, 9V~36V DC Input; 12V DC, 5A, 60W Output

 
Features Features
  • 60W (5A @ 12V)output
• 28Wh or 56Wh, for more than 140 minutes operation time (dependent on panel PC power requirements)
• Rugged metal enclosure for standard VESA 75/100 mounting
• Web-based, remote network management, no software installation required
• Local PC-based monitoring software for input detection and battery status monitoring
• Auto shut down when battery low
• Remote DC output ON/OFF switch for external switch installation
• Provides stable power to the PC during line sags and spikes and absorbs power surges and transients,protecting expensive equipment
 
Specifications Specifications
 
Input
Input voltage Uinated/range DC +9V~+36V
Input current rated 1. Adapter is 12V--6A (Load is 60W)
2. Battery is 6V--12A (Load is 60W)
Standby power consumption 0.3A (0.2A if Network Management disabled)
Operation with charging current 500mA
Operation with charging power consumption 6W
Charging time with system ON/OFF 8hrs / 2hrs (Battery empty)
Output
Output voltage for normal operation DC +12V +/-5%
Output voltage for battery operation, approx. 6~8.4V DC6 V (exhaustive discharge protection)
output current 0A~5A
Efficiency(nominal operation)/power lossat Vin=12V, Iout=80% of full loading 93%
Protection
short-circuit protection Yes
Exhaustive discharge protection 1.Battery low is 10% of Battery capacity
2.Shuntdown 5% of Battery capacity (Default)
3.The end of Battery discharge voltage is 6V
EMC / Safety certification UL, TUV. CE, FCC
Weight 1.2kg
Storage Temperature -20C~50C
Operation Temperature 0C~40C
Dimensions 152mm(L) * 96mm(W)*28mm(H)
LED Indicator Green - DC power input
Yellow - Battery charging
Orange - Bettery discharging
Monitoring
Ethernet interface Web-based, specification 10/100Mbps with RJ-45 connection, Cat. 5 cable
USB interface PC-capable, specification 2.0 with full speed, i.e. 2 Mbit/s. Standard 4-core shielded cable, USB Series "mini B"connector to DC-UPS
Battery
Battery Model Name BAT-LI-2S2P3800
battery type Li-Ion 2S2P 7.4V
Battery capacity 8.4V
The end of discharging voltage 5.6V
Suggestive charging current (Max.) 2A
System continuous discharging current(Max) 7.6A
The end of charge condition 250mA/1Min
Discharge protection Under Voltage Protection / Over Current Protection
Charge protection Over Voltage Protection / Over Current Protection
Ambient temp 0C~40C
Storage Tem -20C~60C
Self-discharge rate 340uA~440uA
Dimensions 139mm(L) * 47mm(W)*26mm(H)
Weight 236g
Cycle life 300 charge/discharge cycles
Backup 60W/10Min
Safety class CE,UL,TUV
 
Ordering Information Ordering Information
 
Part No. Description
AUPS-A20-R10 VESA 75, DC 9~36V input, 12V output 60W UPS module with 3800mAH, 2S2P Li-Ion battery
BAT-LI-2S2P3800 SMART BATTERY;TE9IC032K1002 ;Lithium ion Battery(S2P); 7.4V;3800mAh;RoHS
 
Ordering Information Packing List
 
1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 with lock (P/N:32000-115300-RS) 1 * Remote switch cable, 1200mm (P/N:32000-115600-RS)
1 * Utility CD (including utility software and user's guide, P/N: 7B000-000087-RS) 1 * DC power cable, 150mm, DC plug 5.5x2.1 to DC plug 5.0x2.5 without lock (P/N: 32000-120400-RS)
1 * USB cable, 200mm, USB type A male to mini USB (P/N: 32000-115500-RS) 1 * Screws kit (P/N:44013-030041-RS)