You are here: Home > Products > DC to DC Module > IDDUPS-6301100
IDDUPS-6301100
100 W DC/DC Converter Module, with UPS, Output Voltage (max load): 12V@8.3A , Input: 6 VDC to 30 VDC,

 
Features Features
  - Load down protection
- Over voltage protection
- Short circuit protection
- Over current protection
- Smart battery charger for Li-Polymer
- I/O interface: SMBus/I2C & RS-232
- Support up to 2 battery packs
- AT/ATX modes
- Utility program: pull data out through RS-232 to system
 
Specifications Specifications
 
Input 6 VDC to 30 VDC
Battery charge voltage: 12 V ~ 36 V
Output Voltage (max load): 12V@8.3A
Max. total output:100 W
Efficiency Up to 90%
Weight 82 g
Storage Temperature -40ºC ~ 125ºC
Operation Temperature -20ºC ~ 85ºC
Dimensions 60 mm x 160 mm
 
Ordering Information Ordering Information
 
Part No. Description
IDDUPS-6301100-R10 100 W AT DC/DC 6-30 VDC input, 12 V power module with UPS
BAT-LI-2S1P3000-R20 Smart battery, Li-Polymer, 2S1P, 3000 mAH
CB-5PSBC-RS 20 cm cable to SBC power input
CB-JST3PSW-RS 30 cm cable on/off switch
CB-JST3P001-RS 30 cm 5 VSB, PS_ON wire to SBC
CB-3PSATA-RS 10 cm cable for SATA power
CB-3PIDE-RS 10 cm cable for IDE HDD power
CB-P1LP4-RS 20 cm cable for FSP0601AD101C 60 W/ UP0451E12P 45 W/UP0251E12PL 25 W AC-DC adapter
CB-MD4P4-RS 20 cm cable for 63000-FSP120AAB-RS 120 W AC-DC adapter
CB-NOLP4-RS 20 cm cable for terminal block DC input
CB-ATX20P-RS 30 cm 20-pin ATX to 20-pin ATX cable
 
Ordering Information Packing List
 
1 * IDDUPS-6301100 1 * QIG
1 * DB-9 pin connector cable (32100-157200-RS) 1 * CD utility software