You are here: Home > Products > NVR Solution > ICS-1013
ICS-1013

ICS-1013 is an optional accessory that comes with the QNAP NVR-1012 network surveillance kit. It is a wireless IP camera with powerful functions for home and small office.

  
 
Features

ICS-1013 is an optional accessory that comes with the QNAP NVR-1012 network surveillance kit. It is a wireless IP camera with powerful functions for home and small office. Not only easy to use and install, the camera also offers infrared function which is enabled automatically during the night time to ensure continuous recording and monitoring. With the intelligent motion detection feature, recording is triggered if a moving object is detected. The ICS-1013 supports excellent 2-way audio, which allows users to use it as an impromptu intercom device. By connecting the camera to a powered speaker, you can talk to anyone at the monitoring site remotely.

No more hassles of setting up the wired Ethernet connection! The built-in wireless interface of the camera allows wireless setup and secure encrypted streaming of the monitoring video. Superb image quality of up to VGA resolution in MPEG-4, Motion JPEG compression mode is supported. As a perfect partner of QNAP NVR-101, the ICS-1013 is the new generation digital surveillance solution which provides immediate effective protection yet affordable and it is perfect for home and office.

Advantages of the IP Camera (ICS-1013)

  • Simultaneous 3GPP, MPEG4, MJPEG streaming
    The IP camera supports triple concurrent streaming (3GPP, MPEG4, MJPEG) and remote monitoring via 3G handsets.
  • Auto day & night function
    Infrared is automatically enabled to monitor and record images within 5 meters from the camera at night.
  • 2-way audio support
    Audio monitoring and recording, two-way communication, and voice broadcast from the camera are supported.
  • Wireless network camera, easy to deploy
    The IP cameras can be set up wirelessly. No complicated wiring or installation is required.
Hardware Spec.
Image Sensor 1/4" color CMOS sensor
Day Vision Minimum illumination 0.5 lux
Night Vision IR LED with light sensor control night vision 0 lux within 5 meters with built-in 6 infrared LEDs on
Image Setting Brightness/ sharpness/ saturation
Upside Down and Mirror Yes
Digital Zoom 3x
Compression Ratio Setting 5 levels
Lens Type Board lens
Aperture (F/No.) 2.8
Focus Length 4.5mm
View Angle(Diagonal) 54 degrees
LED Control Normal / Off
Power LED Orange
Link/ act. LED Green
Reset Button Press over 5 sec to reset to factory default
USB Dismount Button Press over 4 sec to dismount USB device
Power Supply EU & UK: Input: 100-240V AC, 0.4A, 50/60Hz; Output DC 5V, 2.5A
US: Input: 100-120V AC, 0.4A, 50~60Hz; Output DC 5V, 2.5A
 
Package Contents
ICS-1013
Adaptor
Ethernet cable
QIG
Mounting kit
Antenna
CD-ROM