 Features |
| |
- Mini ITX form factor base board for Q7 platform
- Support audio, SD Slot, IDE, CFII, Single channel LVDS, TTL
- Support 6 x USB, 4 x COM, 2 x SATA
- Support PCIe x1 slot, 1x PCIe Mini card | |
| |
| Specifications |
| |
| Ethernet |
2 x Realtek 8111CP GbE chipsets
LAN1 shared with PCIe x1 slot (Select by switch)
LAN2 shared with PCIe Mini card Slot (Select by switch) |
| I/O Interface |
2 x SATA/SATA II with 5V/12V power output (not support by iQ7-US15W)
1 x IDE (IDE Signal support from iQ7-US15W)
1 x CF type II (Signal support from iQ7-US15W)
1 x SATA with 5V/12V power output(IDE to SATA JM20330 Signal support from iQ7-US15W)
1 x SD Slot
2 x PS2 KB/MS
6 x USB 2.0
1 x USB Client
1 x LPT
4 x RS232 |
| Super I/O |
Winbond W83627EHG |
| Digital I/O |
8-bit digital I/O, 4-bit input/4-bit output by Winbond W83627EHG |
| Audio |
Realtek ALC883 for 7.1 channels HD audio
1 x Mic-in, Lin-out connector |
| Display Interfaces |
VGA DB15 connector (SDVO to VGA by chrontel CH7021A)
18/24 bit single channel LVDS
TTL (LVDS to TTL) |
| Expansion |
1 x PCIe Mini card slot shared with LAN1(Select by switch)
1 x PCIe x1 slot shared with LAN2 (Select by switch) |
| Power Supply |
ATX support |
| Temperature |
operation: 0ºC~ 60ºC ( 32ºF~140ºF) |
| Humidity |
operation: 5% ~95 non-condensing |
| Dimensions |
170 mm x 170 mm |
| Weight |
GW: 700g / NW: 350g | | |
| |
| Ordering Information |
| |
| Part No. |
Description |
| iQ7-DB-MITX-R10 |
Mini ITX form factor base board for Q7 module |
| 19800-000051-RS |
Dual RS-232 cable |
| 19800-000047-RS |
Single RS-232 cable |
| 32400-029000-RS |
15cm IDE FFC Cable from Q7 Module to Base board |
| 32400-029002-RS |
5cm IDE FFC Cable from Q7 Module to Base board | | |
| |
| Packing List |
| |
| 1 * Mini ITX Form Factor base board for Q7 Module |
1 * Mini Jumper Pack |
| 1 * Utility CD |
1 * QIG | | |
You are here: Home
> Products > ETX Modules > iQ7-DB-MITX
