ACT-408A, 8"EM/Mifare Access Control Terminal
[ Date: 2009-12-3 17:4]
Features  

• Intel® AtomTM processor N270 1.6 GHz CPU for ultra low voltage   fan-less support
• Dual 125KHz-EM/13.56MHz-Mifare RFID reading capacity
• 8¡± TFT touch color screen, fully interface display, all   operation   can be done on the touch screen directly
• Built-in open door relay, alarm relay and exit button input
• Reader tamper proof detection function
• Able to connect external Wiegand 26 slave reader
• Built-in 3W speaker & microphone for bi-direction voice   communication or voice message
• 300K pixel web-camera for real-time image/video access and   capture or facial identification
• 802.11 b/g wireless connection
• Advanced in-wall mounting mechanism design
• IP64 Front panel watertight and dustproof is the perfect solution   for harsh environments
  Wiegand 26 Slave Reader Connection  
ACT-408A remains an Wiegand communications bus interface allowing physical entrance control via a standard Wiegand 26 protocol through the slave reader. Its remarkable advantage is that it can match with most of the access controllers on the market.
Place the ACT-408A outside the door to play the advertising to attract people's attention, and identify the personal information by RFID technology. Via the Wiegand interface, to connect the slave reader inside the door when people leave. DUal identification for use ensure higher security level.
We Provide:
• Send out warning message by relay output
• Anti-tamp function: the alarm will activate if the ACT-408A or slave reader is destroyed
2 NC/NO Relay Output
  

ACT-408A is built-in two relay output controls which are electromechanical switches operated by a flow of electricity in one circuit and controlling the flow of electricity in another circuit. When the electromagnet is energized, it exerts a force on the armature that overcomes the pull of the spring and moves the contact so as to either complete or break a circuit. When the electromagnet is de-energized, the contact returns to its original position.
1. Normal Close Example :
Relay normaly closed means that in its normal state the relay is closed. So when energized it till open and break the circuit.
Electric Lock Type
Electromagnetic Lock Electric Bolt Lock Electric Strike Lock
Fail Secure/Fail Safe
Fail Secure/Fail Safe Fail Secure Fail Secure/Fail Safe
*Fail Secure: Unlocked When Energized
*Fail Safe: Locked When Energized
2. Normal Open Example :
When the relay is normally open, there will be no commection between the two wires until the relay receives a signal (outside source to energize relay ) to close. Simply put, an open relay is the same as a light switch that is turned off , and will always be off until told to turn on.
Place the ACT-408A outside the door to play the advertising to attract people's attention, and identify the personal information by RFID technology. Via the Wiegand interface, to connect the slave reader inside the door when people leave. DUal identification for use ensure higher security level.
We Provide:
• The ACT-408A equipped with Intel Atom performance grade processor has the ability to run multimedia files and shows information, advertising and other messages via Ethernet.
• The main system located in front of elevator to perform access control on the building
• The indide reader limits accessible floors for authorize people.
RFID Identification in Access Market
  

The ACT-408A RFID operating system contains RFID tags, Reader Antenna, Reader and Software (operation system, middleware, applications). When a command is generated by application, reader encodes the command (we say to read tag UID for example) and transmits it with RF format. Tag in RF coverage range then receives RF, turns it into energy, decodes the command and response ( return its UID '01234567' ) in RF format accordingly.
RFID in Access Market Advantages :
• High Security
   
Each RFID tag contains an integrated chip with a unique pemanent identification (UID) number burned-in during the manufacturing process and make counterfeiting difficult.
• High Efficiency
   
Multiple tags can be read in parallel; no line of sight reading.
• High Durability
  
Less subject to environmental damage.
IEI RFID Software Development Kit
 
CoM Part Settings and Activation Area
 
Allows the user to select the serial port used by the to communicate with the RFID reader module.
Commands Area
 
shows various request opions for user to select.
Data Input Area
 
The data input area is where the user enters block number, key, key data, and other information required by certain commands.
Raw Data Display Area
 
shows all communication logs and responses of the executed commands.
EM Card ID Display Area
  
 
Displays the EM card ID when the EM card is detected.
Mifare Card ID Display Area
  
 
Displays the Mifare card ID when the Mifare card is detected.
Error Code Display Area
  
 
Shows the error message when an error occurs.
  

  Windows® Based Terminal easy for Application Development
Low Power Intel Atom CPU Inside
The ACT-408A integrated with the 45 nm Intel® Atom™ processor N270 has a 1.60 GHz clock speed and a 533MHz FSB with a 512 KB L2 cache. The Intel® Atom™ is interfaced through the 533MHz FSB to an Intel® 945GSE graphics memory controller hub (GMCH) which is in turn interfaced through a high-speed direct media interface (DMI) to an Intel® Mobil ICH7-M I/O controller hub (ICH).

    Processor    Processor
    Chipset    Intel® 945GSE/ ICH7M
    Memory    Supports one 2GB (maximum) 400MHz or 533MHz DDR2 SO-DIMM
Windows Environment for Easy and Fast 3rd Party Integration

• Windows CE 6.0 and Windows XP Embedded operating system are able to integrate with other application to create a complete solution.

Vedio/Audio Hardware Device Ready for Third-party Inteagration
  

ACT-408A is unsurpassed in functionality with bulilt-in 3W speakers and microphone for bi-direction voice communication or voice message , 300K pixel web-camera for real-time image/video access and capture or facial identification . The ACT- 408A offers the unique opportunity for third-party hardware integration.
300K pixel Camera up to VGA resolution (640x480)
Analog Microphone
3W Speakers
Face Recognition
Voice Recognition
High quality hands-
The digital camera captures the image of a person's face and compares facial contours and other facial features with those stored in a database.
The microphone captures the voice of a person and compares the signature frequencies with those stored in a database.

free speakerphone
Talk with visitors while they wait outside.

In-Wall Mount
  
age/video access and capture or facial identification . The ACT- 408A offers the unique opportunity for third-party hardware integration.

Tough System Design Ideal for In and Outdoor Applications

The housing of the ACT terminal is hard plastic with IP64 front panel protection. With anti-shock, anti-vibration shields and extended temperature -10ºC~50ºC system design is secured against vandalism and protected against extreme environmental conditions.

I/O Inferface
 


Specifications
  

Model
ACT-408A-N270
Display
LCD Size
8"
Max Resolution
800 x 600
Brightness (cd/m²)
250
Contrast Ratio
500:1
LCD Color
262K
Pixel Pitch (mm)
0.2025(H) x 0.2025(V)
Viewing Angle (H-V)
140º/130º
Backlight MTBF (hrs)
30000
Motherboard
SBC Model
ACTMB4-945GSE-N270-R10
CPU
Intel® Atom™ process N270 1.6GHz CPU
Chipest
Intel® 945GSE + ICH7M
RAM
Supports one 400MHz or 533MHz DDRII SO-DIMM (2GB Max.)
I/O Ports
1 x RJ-45 for RS-232 COM Port
1 x RJ-45 for RS-232/422/485 COM port
1 x RJ-45 for Giga LAN
3 x USB 2.0 (2 in the rear, 1 in front on the panel)
1 x Power Switch
1 x 12V DC Jack
1 x 4 Pin Terminal Block for Signal Input
3 Sensor (Door Sensor x 1, Exit Button x 1, Tamper Sensor x 1)
1 x GND
1 x 8 Pin Terminal Block for Relay Output
6 Relay (Electronic Lock x 3, Alarm x 3)
1 x 12V 1A max. output (for Door control)
1 x GND
1 x 8 Pin Terminal Block for Wiegand Reader
5 Input/Output (Card Reader Data input x 1, Card Reader Clock x 1, Card Reader Indicator x 2, Card Reader Alarm x 1)
1 x 5V/12V output
2 x GND
RFID Module
Working Frequency
EM 125KHz and MIFARE 13.56MHz
Reading Range
5 cm (Under 13.56MHz) / 1~3 cm (Under 125KHz)
Drive Bay
SSD
CF TypeII
Other Features
Watchdog Timer
Software programmable supports 1~255 sec. System reset
Audio
AMP 3W + 3W (internal speaker)
Wireless
1 x Wireless Lan 802.11 b/g Module (internal PCIe mini card interface)
Webcam and Microphone
1 x Webcamwith low light function & Micf Function
LED Indicator
1 x Power On/Off LED on Front Panel
Physical
Construction Front Panel
ABS + PC Plastic front frame
Mounting
In-Wall, Wall, Stand and Arm VESA 75mm x 75mm / 100mm x 100mm
Front Panel Color
Silver
Net Weight (Kg)
1.69
Dimension
(WxHxD) (mm)
225 x 236.5 x 52.5
Environment
Operation Temperature (¡ãC)
-10¡ãC ~ 50¡ãC
Storage Temperayure (¡ãC)
-25¡ãC ~ 60¡ãC
IP Level
IP64 Front Panel
EMC
CE / FCC / CCC
Safety
CB
Touch Screen
Resistive Type 5-Wire (Touch controller IC is on board)
Power Adapter
P/N: 63000-FSP0481AD101C-RS
48W Power Adapter
Input: 90VAC~264VAC, 50/60Hz
Output: 12VDC
Power Requirement
12VDC
Power Consumption
38W

Packing List
  
Item
P/N
Q'ty
Specifications
  Touch Pen
XTR104-0002-RS
1
  Power Adapter
63000-FSP0601AD101C-RS
1
60W, 90VAC~264VAC,
50/60Hz
  Power Cord
32000-000002-RS
1
European Power Cord,
1830mm
  Screw Kit
1
  Utility CD-ROM
1

Options
  Item
  P/ N
  Wall Mounting Kit
AFLWK-12
  ARM
ARM-11-RS / ARM -31- RS
  STAND
STAND-C12 / STAND-B08 / STAND-100-RS/ VSTAND-A12
  OS
ACTCF-408-N270-XPE-R10
ACTCF-408-N270-CE060-R10
  In-Wall Cage
ACTIWC-408-R10

Ordering Information
Model
Description
ACT-408A-N270/WT-R/1GB-R10
8" 250cd/m² SVGA fanless panel PC with Intel® ATOM™ N270 1.6GHz, 802.11b/g wireless module, touch screen, 0.3M
camera with digital Mic, MIFARE & EM RFID module, support WIEGAND 26, door control, 1GB DDR2 533, RoHS